A Practical Safety Checklist for Facet Joint Injections and Radiofrequency Ablation
By Ivan Urits, MD – Board Certified in Anesthesiology and Pain Medicine
Published January 27, 2026 | Category: Pain Medicine
Facet joint injections, medial branch blocks and medial branch radiofrequency ablation (RFA) are among the most common spine procedures. In 2025, the International Pain and Spine Intervention Society (IPSIS) published concise "safety practices" for each one in Interventional Pain Medicine. They highlight the steps most likely to prevent avoidable complications.
This summary is based on the open-access full text. Read the article on PubMed
What the authors did
Expert groups wrote separate safety practices for facet joint injection, lateral atlantoaxial (C1-C2) joint injection, medial branch blocks and medial branch RFA. Each covers who should perform the procedure, contraindications, blood thinners, sedation, sterile technique, imaging, injection technique and aftercare.
Key recommendations
- Training and staffing: Only physicians trained in the technique should perform it, with trained staff running the fluoroscopy unit.
- Image guidance is essential. Fluoroscopy is the recommended guide because it has the strongest safety evidence. Use the lowest radiation dose that does the job (ALARA).
- Confirm needle position in at least two views before injecting anything, and use contrast to confirm placement.
- Neck-specific cautions: For cervical facet injections from the side, check depth often to avoid the spinal cord. Avoid a lateral approach at C7-T1 because of the risk of collapsed lung. Use non-particulate dexamethasone, especially at upper cervical levels, and do not mix it with ropivacaine.
- Small volumes: Facet joints hold very little, so keep the injection volume to 1 mL or less.
- Blood thinners: Bleeding risk for facet injections is low, and blood thinners generally do not need to be stopped. Decisions for higher-risk procedures should involve the prescribing physician.
- Sedation is not usually needed. If used, the patient should still be able to report pain.
- RFA safety: Fully attach the grounding pad, avoid temperatures above 90 °C, stop if the patient feels pain shooting into an arm or leg, and do not perform both sides of the neck at the same visit, to avoid weakness of the neck muscles ("head drop").
- Aftercare: Monitor patients and give clear written discharge instructions.
Why this matters
Many serious complications from spine injections come from a few predictable errors: poor imaging, wrong medication choice, too much volume, or heavy sedation that hides warning signs. A short, procedure-specific checklist makes the safe approach the default.
Limitations
These are expert recommendations based on the available literature, not new research. They do not replace individual clinical judgment, and some points, such as the role of ultrasound, may change as evidence grows.
Safety takeaways: how to apply it
For pain physicians and procedure teams
- Use multiplanar fluoroscopy and contrast confirmation before every facet injection.
- Choose non-particulate steroid in the neck and keep joint injection volumes small.
- Stage bilateral cervical RFA on separate days.
For hospitals, clinics and safety leaders
- Turn these safety practices into procedure-specific checklists and time-outs.
For patients and families
- Ask whether imaging will be used and whether you will be awake enough to speak during the procedure.
Reference
- Klessinger S, Schuster N, MacVicar J, Miller DC, McKenna M, Vorobeychik Y, et al. Safety practices for interventional pain procedures: Facet interventions. Interv Pain Med. 2025 Mar;4(1):100549. doi:10.1016/j.inpm.2025.100549. PMID: 40092622. PubMed: https://pubmed.ncbi.nlm.nih.gov/40092622/
This article is educational information, not legal or medical advice.